Topics
-
- 1 reply
- 439 views
Hi, im new to server hosting, and was curious how the "virtualization" process works, especially in reguards to sbs2008.
Last reply by F2 Staff, -
Here is another error I get when i was looking the configuration in Server Manager - Roles - Web Server, on the right I have an error: ERROR Source IIS-W3SVC The World Wide Web Publishing Service (WWW Service) did not register the URL prefix http://*:80/ for site 2. The necessary network binding may already be in use. The site has been disabled. The data field contains the error number. I have three errors.... I needo to know why?
Last reply by Maripili, -
- 0 replies
- 2.2k views
Hi, I go to Features y Server Roles, and I got this error: : This server might need to be restarted after the installation completes. .NET Framework 3.5.1 Features .NET Framework 3.5.1 WCF Activation HTTP Activation Non-HTTP Activation Windows Process Activation Service Process Model .NET Environment Configuration APIs .NET Framework 3.5.1 Features: Installation failed : Attempt to install .NET Framework 3.5.1 failed with error code 0x80070643. Fatal error during installation : Attempt to install Non-HTTP Activation failed with error code 0x80070643. Fatal error during installation : Attempt to install HTTP Activat…
Last reply by Maripili, -
- 2 replies
- 780 views
Hi all, We've just migrated from Srv 2k3 x86 to Srv 2k8 x64. All users are connected via TS. We have a print server that is running Srv 2k3. Now, when users connect to the new TS, they can't add any printer because of the driver is not correct (no x64 drivers). That's ok... but here's the point: every user have about 7 printers (default XPS, NETWORK PRINTER ON PRINT SERVER, ...) that are mapped and are working, after the printer's name I have something like "(redirected 3)"! So, I tried to add THE SAME NETWORK PRINTER using the wizard and I stuck on the problem regarding driver compatibility. What I want to know is: WHERE IS SPECIFIED that at user logon window mu…
Last reply by ICTCity, -
- 0 replies
- 984 views
Hi Everyone, I have an installed windows Server 2008 and Novell Netware 6.5.Now I want to get rid of Novell Netware 6.5 and just have Windows Server 2008. So I need to copy all the Data from Novell Netware 6.5 to Windows Server 2008.Please note that Windows Have problem in regards to file naming Conventions i.e. it cannot copy files with names > 256 characters. To my Knowledge - If we can communicate both of the OS's i.e. Novell uses IPX/SPX protocol and Windows uses TCP/IP protocol.We need to do that by installing Nwlink IPX/SPX Netbios protocol Compatibility Transport Portocol but in windows 2008 we cannot install Nwlink IPX/SPX Netbios protocol Compatibilit…
Last reply by knadella, -
- 0 replies
- 171 views
Hi all, The Support Team is pleased to announce the availability of Support Toolkit 1.0.3. This release introduces a number of new features into the toolkit as well some major improvements to existing tools. This new release can be downloaded from the http://www.phpbb.com/customise/db/official_tool/stk/" class="postlink">Support Toolkit page in the CDB. Updating When updating from any older Support Toolkit version first delete the old [iCODE]stk/[/iCODE] directory before uploading the new version. Translations Translations for this release can be downloaded from http://www.phpbb.com/customise/db/official_tool/stk/support/stk_1.0.3_translations-t_89947" class…
Last reply by AWS, -
- 0 replies
- 144 views
Hi all, The Support Team is pleased to announce the availability of Support Toolkit 1.0.3. This release introduces a number of new features into the toolkit as well some major improvements to existing tools. This new release can be downloaded from the http://www.phpbb.com/customise/db/official_tool/stk/" class="postlink]Support Toolkit page in the CDB. the old Translations for this release can be downloaded from http://www.phpbb.com/customise/db/official_tool/stk/support/stk_1.0.3_translations-t_89947" class="postlink]this topic. To use a translation, simply download it and place it in the stk/language directory. [Change] Migrated the versioncheck files to
Last reply by AWS, -
- 1 reply
- 804 views
Hi Server Forum I have got Server 2008 Enterprise installed on my Server, I have configer the Domain Contoler but i want to be able to acces my Domain Contoler outside my network. I belive i have to buy and Domain Name What is no problem i can do that but i don't now how to sort out the rest. Please could someone help me to fix this and get it up and running. Thanks Luke
Last reply by ICTCity, -
- 1 reply
- 490 views
HI, I want to build my own thinclient using an old PC with windows server 2008 but the problem is I'm a newbie in this. Please, someone who had successfully implemented a thinclient workstation share their ideas. Thanks; Daryll
Last reply by ICTCity, -
- 1 reply
- 1.4k views
I have a very strange issue. We have inherited the support of a Windows Server 2008 R2 environment from a now defunct Tech Services company. The environment includes an RDP Member Server and 2 DC's. The issue is all of the Existing accounts work fine, but when we create a New User account and give them all the same permissions as an Existing user, while logging in through Remote Desktop this new user gets immediately logged off. I open a Remote Desktop Session from any remote machine (Win7, XP or Vista), get the Login screen, you See the "Welcome" Screen, followed by "Applying User Settings" then "Logging Off" shows up on the screen and I get kicked out. I next tried…
Last reply by ICTCity, -
- 2 replies
- 586 views
Hi, I'm a beginner in tihis tema, please helpme I have a problem with my 2008 server: 1 ) when I create a folder its shows a messege saying something like this: " This folder is already created, Do you want to replace it?". 2) when I open any folder I see that there are already created direct accesses of many kinds. I use antivirus Kasperky but I cant delet the virus, I cant change the antivirus (job politics) neither and I cant format the server 'cause it is uses data base. Please help me. I hope for your feedback. Thanks
Last reply by phyolwin, -
- 1 reply
- 539 views
I am a new forum member here needing information on server hardware. I am installing an electronic medical records program in a small one-doctor office that runs on a dedicated server. Here are the system requirements per the program: Server: Equivalent to Quad Core 2.66 Ghz processor or higher 4GB RAM, 32GB+ System Drive 500GB + Data Drive Raid 1 - 72GB OS partition DVD drive Backup system Server operating system (required): Windows 2008 Server (Standard) 32 bit only Database Platform: SQL Server 2005 Standard edition (included with software purchase) I plan to have four hard-wired workstations running off the server and one or two wireless tablets. I …
Last reply by F2 Staff, -
- 1 reply
- 688 views
Hello, At home, I have a Server 2008 machine with a shared printer, but I have a problem. When a print job comes in, I want to run a batch file I made myself. I'm looking for this for 3 weeks now, but I didn't find anything that works on server 2k8... Any ideas? Gr, Knutselman
Last reply by F2 Staff, -
- 0 replies
- 987 views
Hi Everyone, I want to migrate from Novell netware 6.5 to Windows Server 2008. Can you please let me few possible ways of doing it ? And there are problems associated with it when we try doing it by installing Novell Client on Windows Server 2008 as the memory shoots up when it tries to copy a File of size 256 Characters or higher..... Please recommend some good possible solution. Thanks, Karthik
Last reply by knadella, -
- 0 replies
- 3.3k views
HI I currently have a Windows Server 2008 Foundation set up as a domain controller for an office of about 6 clients. I have the default 2 administrator remote desktop connections enabled and working for us to connect to the server from outside the office, however i now have the need for two more connections to the server, so a total of 4 required. Could someone guide me towards what i need to do to achieve this? I have been looking into TSCALS as i think this is the direction i need to go to get this set up but im not 100% sure. Any advise would be greatly appreciated Kind Regards Leo
Last reply by incito, -
- 5 replies
- 1.2k views
Hello all. I have recently installed an SMTP server on my machine. IP address is [All Unassigned] TCP port 2525 (it won't start on port 25). Relay restrictions are to 127.0.0.1, authentication is Anonymous access only. ASP code is as follows: Set objCDOSYSMail = Server.CreateObject("CDO.Message") Set objCDOSYSCon = Server.CreateObject ("CDO.Configuration") objCDOSYSCon.Fields("http://schemas.microsoft.com/cdo/configuration/smtpserver") = "127.0.0.1" objCDOSYSCon.Fields("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = 25 objCDOSYSCon.Fields("http://schemas.microsoft.com/cdo/configuration/sendusing") = 1 objCDOSYSCon.Fields("http://schemas.microsoft.…
Last reply by F2 Staff, -
- 1 reply
- 494 views
We have a windows server 2008 enterprise installation and we are wanting to install remote desktop services so that multiple accounts can terminal into it. Ive seen that you can install remote desktop services with windows server 2008 R2. It doesnt appear to be an option with 2008 enterprise. Can you install remote desktop services on plain enterprise. If not, is there any way to get terminal server ability on 2008 server enterprise.
Last reply by F2 Staff, -
- 0 replies
- 815 views
Hi Everyone, I just wanted to find out whether if there is any method of Migrating from Novell Netware 6.5 to Windows Server 2008. I think we can install Novell Client on Windows Server 2008 and copy the stuff but that is not recommended. Post your Answers ASAP..... Thanks in Advance. Karthik
Last reply by knadella, -
- 0 replies
- 881 views
can anyone tell me how to Send messages to teammates who are on my network via windows server 2008? I know many people can do that. But I don't know how.
Last reply by angle, -
- 18 replies
- 4.9k views
Hey folks - I've followed the various guides on how to get a batch file to run automatically upon Windows 2008 startup (vs. user login). The batch file I've written is really simple: @echo off net use z: \\server.fqdn\share_name passwd /user:username It sort-of works. Once the machine boots, I open the Windows Explorer, and I see the drive mapped but "Disconnected" with a big red X next to it. If I click on the drive, I can see its contents. If I try to right-click and disconnect it, no luck. It tells me the path doesn't exist. I get a similar error if I try to remove it using "net delete". So I'm doing something wrong, I'm just not sure where to look. The…
Last reply by jvp,
-
Who's Online 0 Members, 0 Anonymous, 5 Guests (See full list)
- There are no registered users currently online