Topics

I need to install SSLEAY32.dll on my Windows 2008 server. How do I do it? I tried to do it by copying the it from my XP system and putting it in the PATH but that did not work. It could not find the dll. I moved it to C:\Windows\System32 and ran regsvr32 filename.dll but it gave me a "failed to load" error message. I have 2 questions: 1) I know it is software from OpenSSL.org but I could not find it there. Where can I get a reliable copy that is compatable with Windows 2008 server? 2) How do I install it? Was I correct in moving it to \Windows\System32 and running regsvr32? TIA dave-

I have an older Windows server with 2003 Standard, acting as the DC, DHCP and DNS. There are roughly 30 user accounts in AD. Is there an easy way to migrate the old AD onto the new box with Server 2008 on it. Thanks.

Hello experts, I have a problem of getting a list of sessions from TS Session Broker (Windows Server 2008). The question is how can we get a list of sessions on local computers without asking each computer but asking about theirs sessions from only Session Broker? Is it possible to make by WMI? Any help would be appreciated.

hi, maybe someone can help me... i want server 2008 to act as a router, so im running Windows Server 2008 with RAS, NAT. i have also a SBS 2003 running. all required ports are forwarded to the SBS. (when everythig is running fine i want to run the SBS in HyperV Envirement) the problem is, that port forwarding is only functional for external computers. when i type: www.sentek.org then this only works from outside computers. (also it doesent works at home if i type the Internet IP Adress). route print - gives this =========================================================================== Schnittstellenliste 11 ...00 18 f3 f6 04 b9 ...... Marvell Yuk…

Hi Guys I am new here and newbie in relation to IT and servers (changing my skills right now). I have a problem. Got some old PC's to help me train in getting MCITP. I had setup server 2008 no problems. Can connect to it via remote desktop using cable connection. PC's did not have Wireless cards and as my entire house is wireless I got a USB wifi card. It is connecting to network, gets IP, I can ping it and use internet but not remote desktop. It states computer not found. I had enabled remote desktop to allow all connections. I had also disabled cabled network card but that did not help. Any ideas? Cheers Lukas

Dear Friends, I installed window 2008 server, but could see my wireless route, and could creat a wireless connection. I appreciate if you could help. Regards, Guang guangchen55@yahoo.com

I configured a 2008 server to be a DC and DNS server. All installs went well, but now that it's up and runnning it takes about 20 to 30 seconds to load a web page. Once it loads, the speed is fine. It seems like DNS is taking way too long to resolve names on the Internet. I have a SonicWall TZ 190 that is acting as the DHCP server and handing out the internal IP of the DC/DNS server to all workstations. If I manually configure the clients with the ISP's DNS servers they run fine. It has to be an issue with the DNS server. Any suggestions would be much appreciated.

Although I am trying to run WS08 as a workstation, regardless, there are way too many black screens. These aren't exactly errors (I believe), just ugly. What i mean is, when I boot up, the screen is black for about 15 seconds and if not for the hardware, on screen there is no indication that anything is starting up. Then, I see the loading progress bar (no logo) for about 5 seconds. Then the screen goes black again and the monitor turns off for about 10 seconds. Then the login screen shows. I login and see another black screen for about 5 seconds before seeing the desktop. Once I am in, if I press Ctrl+Alt+Del, I see a black screen before the menu shows up and if I select…

When connected to a shared folder on a Server 2008 server, the shared folder will lock or freeze up all the workstations that are logged in to that shared folder. The problem is not consistent as to when it will happen. So the question is: Should I look for a faulty workstation (nic, cable, etc.)?, Nic on the server, cable , etc.? Switch?, Workstation not associated with the server at all? Software that is running on the server? This problem has me and the main user and her staff completely puzzled. Any ideas would be appreciated. I put this in this forum, because I am not sure if it is a network issue or not? Thanks in advance.:(

Hi all. I am in the process of setting up a brand new Intel MFSYS 25 modular server system with Windows Web Server 2008 for the purpose of hosting redundant web and mail servers. The MFSYS25 has a shared LUN feature which allows me to create a RAID5 drive and allow multiple servers to access it at the same time. Which is great, because I have created individual system partitions (drive C) for the OS and a shared data partition (D drive) for web files and email to be stored. However, although all servers can see the D: drive it would seem that they can't access the same files at the same time. For example, I have several folders in there and while Server1 can read…

I have a Windows 2000 IIS5 server with around 40 apps on it. These apps vary in size and complexity but it represents about 9 years of dedicated application development time so the amount of code deployed is NOT insignificant. We have always been very please with the functionality and stabiltiy of this server but we are finally starting to hit the wall on some new development we are doing (for instance, support for Office 12 drivers). We are also pretty familiar with Windows Server 2003 IIS 6. However, if I'm going to dedicate team time to deploying, testing, and refactoring for IIS6, I am tempted to move to IIS7, go through the upgrade cycle just once, and be able to …

TSZ Admin submitted a new resource: [plain]Hyper-V: Step-by-Step Guide to Using Live Migration in Windows Server 2008 R2[/plain] - [plain]Hyper-V: Step-by-Step Guide to Using Live Migration in Windows Server 2008 R2[/plain] Read more about this resource...

TSZ Admin submitted a new resource: [plain]Installing the Beta Release of Windows Server 2008 R2[/plain] - [plain]Installing the Beta Release of Windows Server 2008 R2[/plain] Read more about this resource...

TSZ Admin submitted a new resource: [plain]Windows 2008 R2 & Hyper-V Server 2008 R2 - Hyper-V Live Migration Overview[/plain] - [plain]Windows 2008 R2 & Hyper-V Server 2008 R2 - Hyper-V Live Migration Overview[/plain] Read more about this resource...

Hello. Could you please help me with next problem: I have freshly installed Windows Server 2008 Enterprise SP build 6001. Service RRAS is started, configured and works properly. Server has 2 network cards (named LAN and WAN): LAN is interface for internal network, IP 10.0.0.1, no gateway set. WAN is interface for external network, IP 192.168.112.45, gateway 192.168.112.4 Server is NAT from internal to external. And it works fine. With RRAS I creates a PPPoE-connection thru WAN interface, servers gets additional IP IP 81.200.116.70. Gateway is nothing until no static route is set via dialog in RRAS console: address 0.0.0.0, mask 0.0.0.0, interface Dial-In Interfa…

I'm having some troubles with hiding the Search form in the Start Menu under Windows Server 2008 (Terminal). I'm using a group policy to deploy my security settings. From al the settings under the section Start-Menu in the policy editor none of them is working.

Hallo, I am new to Windows Server 2008 and I have a problem regarding folder/file or sharing permissions (x64). In the morning when the users log in they can view and open the folders/files in D:\User\Cad\ within the windows file explorer (WinXP Clients) but not when running an old CAD program (16 bit?) windows application using its own file browser - only files created by the user are visible to himself. The weird thing is when I change some permission setting for the folder D:\User\Cad and reset the changes afterwards the users are able to see all the files with the CAD programs file browser until the next morning. My shared folder "user" on drive "D" (D:…

Hi, I am a newbie in Windows Server 2008. GUI interface are entirely different from Win2K3. Do you have a guide in setting up a Two Node cluster for Windows Server 2008? It seems that this OS is entirely different from Windows Server 2003. I will be installing the first Windows Server 2008 cluster of SQL 2008 for our testing environment. What's the use of the Role of Hyper-V in setting up the cluster? How do I add this role since I can't find it in the list Roles? Can I proceed in creating the cluster without the Hyper-V role? Your help is greatly appreciated.

Is there a wireless NIC compatible with windows 2008 64bit? I've tried the ailink 101, but so far no luck. any suggestions???

HI, I have a task that is required to repeat every 7 minutes for 100 minutes. I have set the obvious things, but when it runs it just carries on past the 100 minutes, forever (or until I disable the task.) It seems odd to me that there are two places within the Task Scheduler settings dialogs where this limit can be set: a) Within the "Advanced settings" of "Edit trigger" within the "Triggers" tab there is: "Stop task if it runs longer than..." option, and, b) Within the "Settings" tab itself there is another "Stop task if it runs longer than..." option... I wonder what happens if one sets conflicting values? Anyway, I haven't - I have set 100 minutes in e…