abatishchev

Look here, I have a problem I think like yours. A website binded to *:80 on server doesn't opens from local network on address http://somedomain.net (which is binded to an Internet IP) and opens only on internal address (http://10.0.0.1) I mean, it seems that Windows 2008 doesn't answers on packages from Internal network targeted to External IP. I my example, it's from 10.0.0.x -> 81.x.x.x (10.0.0.1) and doesn't works In your, from 192.168.x.x -> 168.x.x.x (192.168.0.50) and doesn't works too! Maybe, additional network routes are required, unfortunately I don't know yet

So what is your problem? Describe it more, please.

Hi Do you mean, that SBS is not visible from computers in 192.168.0.0 network? Maybe you set port forwarding to forward ports only from external interface (194.183.136.234), not internal?

Hello. Could you please help me with next problem: I have freshly installed Windows Server 2008 Enterprise SP build 6001. Service RRAS is started, configured and works properly. Server has 2 network cards (named LAN and WAN): LAN is interface for internal network, IP 10.0.0.1, no gateway set. WAN is interface for external network, IP 192.168.112.45, gateway 192.168.112.4 Server is NAT from internal to external. And it works fine. With RRAS I creates a PPPoE-connection thru WAN interface, servers gets additional IP IP 81.200.116.70. Gateway is nothing until no static route is set via dialog in RRAS console: address 0.0.0.0, mask 0.0.0.0, interface Dial-In Interface, metric1. So gateway becomes 10.0.13.21. After this acrions result of route print is next: Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.112.4 192.168.112.45 20 0.0.0.0 0.0.0.0 10.0.13.21 81.200.116.70 2110.0.0.0 255.255.255.0 On-link 10.0.0.1 276 10.0.0.1 255.255.255.255 On-link 10.0.0.1 276 10.0.0.10 255.255.255.255 On-link 10.0.0.10 306 10.0.0.255 255.255.255.255 On-link 10.0.0.1 276 10.113.0.0 255.255.0.0 192.168.112.4 192.168.112.45 21 10.118.0.0 255.255.0.0 192.168.112.4 192.168.112.45 21 10.123.0.0 255.255.0.0 192.168.112.4 192.168.112.45 21 81.200.116.70 255.255.255.255 On-link 81.200.116.70 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.0.0 192.168.112.4 192.168.112.45 21 192.168.112.0 255.255.255.0 On-link 192.168.112.45 276 192.168.112.45 255.255.255.255 On-link 192.168.112.45 276 192.168.112.255 255.255.255.255 On-link 192.168.112.45 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.0.0.1 277 224.0.0.0 240.0.0.0 On-link 192.168.112.45 277 224.0.0.0 240.0.0.0 On-link 10.0.0.10 307 224.0.0.0 240.0.0.0 On-link 81.200.116.70 21 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.0.0.1 276 255.255.255.255 255.255.255.255 On-link 192.168.112.45 276 255.255.255.255 255.255.255.255 On-link 10.0.0.10 306 255.255.255.255 255.255.255.255 On-link 81.200.116.70 276 =========================================================================== Persistent Routes: None Default route thru WAN gateway (192.168.112.4) has metric lower then just created thru PPPoE gateway (10.0.13.21)! That's why inter net doesn't works, WAN gateway 192.168.112.4 answers No route to host. All goes works fine only after deletion of default route thru WAN gateway (0.0.0.0 ; 0.0.0.0 ; 192.168.112.4 ; 192.168.112.45 ; 20) or increase it's metric to 21+. How to fix that? Why I set metric for static route to 1, but it sets as 21? (metric of WAN + specified value) ?? P.S. In Windows 2003 this configuration works great!