castona Posted December 14, 2009 Posted December 14, 2009 Hi All, Help needed. Trying to configure a Windows 2008 R2 server to be a print server. But there is always an error when trying to share error 0x000006d9 print spooler has been started print services has been added on the roles network and file sharing enable. firewall disabled what else am i missing? This is the error Quote
mmthomas Posted December 15, 2009 Posted December 15, 2009 If you didn't turn on Network Discovery at the same time that you enabled file and print sharing, then try turning it on. If you did, try turning everything back off, re-enable the firewall, turn on all the sharing again and then disable the firewall again. Quote
dfleming Posted December 17, 2009 Posted December 17, 2009 Hi All, Help needed. Trying to configure a Windows 2008 R2 server to be a print server. But there is always an error when trying to share error 0x000006d9 print spooler has been started print services has been added on the roles network and file sharing enable. firewall disabled what else am i missing? This is the error Hi Castona This has had me stumped for days, I have researched many solutions, all to no avail. TODAY i found the solution !!!! print spooler has been started network and file sharing enabled. firewall running in manual (for the sake of the result) Create your printer shares without errors and you can then check the share is available. Everything worked. I then stopped the firewall, rebooted and tested again ... ALL GOOD print spooler has been started network and file sharing enabled. firewall off manual Also as a side note I was able to create the printer shares when the server was not joined to the domain, who would have thought. Thanks VMware for providing the quick flexibility to trash servers in the name of troubleshooting. My users are happy they can connect to the printer shares. Good luck. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.